Zyxel GS1900 Patch 2 Still Left a Hole Open

Network gear that already got a security update still needed another one. Zyxel published a November 3, 2026, advisory for an out-of-bounds write bug in the web management software on its GS1900 series switches. The Hacker News reported on November 5 that researchers at Binarly found that the company's earlier June fix, called Patch 2, did not stop the exploit attackers had already been using. We re-checked Zyxel's advisory and The Hacker News report on November 6, 2026, at about 7:13 AM ET.

What the flaw does

Zyxel's advisory says the bug sits in the CGI program that handles the switch's web interface. A "LAN-based, unauthenticated attacker" who can reach that interface could send a crafted HTTP request and "potentially execute OS commands," the company writes. The Hacker News, citing Binarly, says the attacker's commands run with root privileges and that the researchers rate the issue 9.8 on the CVSS scale, while Zyxel's CVE entry rates it 8.8. The outlet tracks the new flaw as CVE-2026-107441 and the earlier June issue as CVE-2026-7273.

Binarly reported the problem to Zyxel on September 29, The Hacker News says. Zyxel's advisory credits Yegor Vasilenko and Fernando Mercês of Binarly and lists its initial release date as November 3, 2026.

Which switches need Patch 3

Zyxel's table names ten models. For each model, firmware ending in ".2)C0 and earlier" is affected, and the matching ".3)C0" build is the patch. Copied from the advisory:

Affected model Affected version Patch availability
GS1900-8 2.90(AAHH.2)C0 and earlier 2.90(AAHH.3)C0
GS1900-8HP 2.90(AAHI.2)C0 and earlier 2.90(AAHI.3)C0
GS1900-10HP 2.90(AAZI.2)C0 and earlier 2.90(AAZI.3)C0
GS1900-16 2.90(AAHJ.2)C0 and earlier 2.90(AAHJ.3)C0
GS1900-24 2.90(AAHL.2)C0 and earlier 2.90(AAHL.3)C0
GS1900-24E 2.90(AAHK.2)C0 and earlier 2.90(AAHK.3)C0
GS1900-24EP 2.90(ABTO.2)C0 and earlier 2.90(ABTO.3)C0
GS1900-24HPv2 2.90(ABTP.2)C0 and earlier 2.90(ABTP.3)C0
GS1900-48 2.90(AAHN.2)C0 and earlier 2.90(AAHN.3)C0
GS1900-48HPv2 2.90(ABTQ.2)C0 and earlier 2.90(ABTQ.3)C0

The Hacker News says the Patch 3 files were posted around October 23 and that any switch still on Patch 2 or older needs the Patch 3 build for its exact model. Zyxel's advisory does not list a temporary workaround for owners who cannot update yet. It also says that "on-market products not listed in the table remain unaffected."

Why Patch 2 was not enough

According to The Hacker News's summary of Binarly's analysis, the web program stores request parameters in a fixed table that holds 140 entries and, before Patch 2, never checked how many it had stored or how large each one was. The exploit sends an oversized 140th parameter that overwrites a counter. It then uses the next parameter to redirect what the program runs. Patch 2 added a counter check, but only after the oversized value had already been copied. The exploit still worked against Patch 2 without changes. Binarly tested that on emulated firmware and on real hardware, the outlet reports. In Patch 3, the counter is checked before the copy, and the copy itself is size-limited.

Earlier attacks on GS1900 gear

GreyNoise reported on September 21 that attackers took data from 996 GS1900 switches around August 17, The Hacker News recounts. That haul included configurations, hashed root credentials and network details, and 564 of the switches still used factory-default logins. GreyNoise tied those attacks to CVE-2026-7273. Binarly says the exploit GreyNoise described matches the one it recovered, the outlet reports, though neither firm has said the compromised switches were already on Patch 2. The researchers found the exploit on September 17 in an open folder on a server that also acted as a command host for a backdoor Acronis has linked to a Chinese-speaking group it tracks as Red Heron, known in some reporting as JITTERLY infrastructure.

CISA added CVE-2026-7273 to its Known Exploited Vulnerabilities list on September 21. As of The Hacker News's story, CVE-2026-107441 was not yet on that list. Zyxel's advisory does not say whether the newer flaw has been used in attacks. The Hacker News notes that the advisory also does not say whether installing Patch 3 removes access an attacker may already have.

Why this matters

Zyxel's advisory and The Hacker News reporting both describe a path to OS command execution when the web management interface is reachable. A firmware string that still matches a Patch 2 build is not the Patch 3 fix listed for that model.

Our advice (general guidance): on each GS1900 you own, open the admin screen and copy the full firmware string exactly as shown. Match that string against the affected and patch columns in Zyxel's November 3 advisory table for the same model. If your build is listed as affected, install the matching Patch 3 build named in that table, using the firmware files linked from Zyxel's security advisory or firmware release notes for that model.

Our advice (general guidance): put the switch's web management interface only on a network path reserved for administrators. Avoid leaving it reachable from general staff networks or from outside your building.

Our advice (general guidance): after you install Patch 3, change the admin password if it was ever left at the factory default, and look for unfamiliar accounts or odd outbound connections. The Hacker News notes that Zyxel's advisory does not say whether the update removes access an attacker may already have.

Our advice (general guidance): if a managed service provider handles your switches, ask for written confirmation of the exact Patch 3 build string on each GS1900, rather than a generic note that Zyxel gear was patched.

Questions about a device update? Contact us or use our report page.

Sources

Published November 6, 2026 by FraudMeNot Team. Label: Real, reported.

Disclaimer. General education only, not legal, financial or security advice. No guarantee. Consult a qualified professional. News summaries are based on the sources listed and may change as more is reported.

Source: Zyxel Networks security advisory (Nov 3, 2026) and The Hacker News report on Binarly's findings (Nov 5, 2026), checked Nov 6, 2026, about 7:13 AM ET. FraudMeNot is not affiliated with Zyxel, Binarly or any outlet cited. General education only, not legal advice, and no guarantee of protection.